CNC高壓清洗機工業清洗的對象種類繁多，根據清洗對象輸送形式的不同，我們可以簡單地把清洗分為以下七種方式，它們分別是：

There are many kinds of objects for industrial cleaning of CNC high-pressure cleaning machine. According to the different transportation forms of cleaning objects, we can simply divide cleaning into the following seven ways, which are:

一、網帶步進式清洗。就是把清洗對象送到一定位置后，由噴嘴對其進行清洗。

1、 Step by step cleaning of mesh belt. That is, after the cleaning object is sent to a certain position, it is cleaned by the nozzle.

二、懸掛式噴嘴清洗。通俗地來講就是把清洗對象掛在高空中的繩索上，并送清洗裝置前，然后通過清洗、漂洗、吹干等工序后，就完成了清洗的任務了。這種清洗方式適合于裝配線和噴漆線的連續自動化的清洗。

2、 Hanging nozzle cleaning. Generally speaking, the cleaning object is hung on a rope in the air and sent to the cleaning device, and then the cleaning task is completed after cleaning, rinsing, drying and other processes. This cleaning method is suitable for continuous and automatic cleaning of assembly lines and painting lines.

三、噴射方式清洗。就是事先把清洗對象固定好位置，然后操作人員手拿高壓噴槍對清洗物體進行作業。這種清洗方式適合于清洗重型、大型設備油污和車輛外殼的灰塵等。

3、 Universal spray cleaning. That is to fix the cleaning object in place in advance, and then the operator carries out operation on the cleaning object with a high-pressure spray gun. This cleaning method is suitable for cleaning heavy and large equipment oil dirt and vehicle shell dust.

四、網帶連續清洗。就是把清洗對象送清洗系統前，然后經過清洗、漂洗、壓縮空氣吹干等工序后，即可完成清洗作業。

4、 The mesh belt is cleaned continuously. It is to send the cleaning object to the cleaning system, and then complete the cleaning operation after cleaning, rinsing, compressed air drying and other processes.

五、液壓步進式定位清洗。就是把清洗對象通過液壓送到清洗系統前，再由噴嘴對其進行清洗、漂洗、壓縮空氣吹干等工序，即可完成工作。

5、 Hydraulic step positioning cleaning. The cleaning object is sent to the cleaning system by hydraulic pressure, and then cleaned, rinsed and dried by compressed air through the nozzle.

六、螺旋輸送式清洗。就是把清洗的對象由螺旋槽送到清洗系統前，先后清洗、漂洗、壓縮空氣吹干等工序，即可完成工作。適合的清洗對象是——螺釘、螺母、鏈條、滾子等標件進行清洗。

6、 Screw conveyor cleaning. That is, before the cleaning object is sent to the cleaning system by the spiral groove, the work can be completed by successively cleaning, rinsing, compressed air drying and other processes. Suitable cleaning objects are standard parts such as screws, nuts, chains and rollers.

七、旋轉式清洗。簡單地來說就是把清洗對象放置在工作平臺上，使旋轉噴嘴對被清洗對象進行地處理清洗工作，這種旋轉式噴嘴可以旋轉180，對清洗對象可以靈活便捷地作業，這清洗方式適合于批件量不是太大的機械零件上污垢的處理。

7、 Rotary cleaning. Simply put, the cleaning object is placed on the working platform, so that the rotating nozzle can handle and clean the cleaned object in an all-round way. This rotating nozzle can rotate 180 °, and the cleaning object can be operated flexibly and conveniently. This cleaning method is suitable for the removal of dirt on the mechanical parts with a small batch of parts.

CNC高壓清洗機根據對象輸送方法的7種清洗形式就詳細講解完畢了，感謝您的閱讀，希望給您好的幫助，更多事項就來我們網站http://m.cmicroentropy.com咨詢了解吧！