噴淋清洗機由噴嘴、噴頭、高壓槍、噴桿及連接接頭等部件組成，噴淋清洗機的高壓槍是清洗機的核心部件及使用的主要工具，下面來講講高壓槍的使用原理吧。

The spray cleaning machine is composed of nozzle, nozzle, high-pressure gun, spray bar, connecting joint and other components. The high-pressure gun of the spray cleaning machine is the core component of the cleaning machine and the main tool used. Now let's talk about the principle of using the high-pressure gun.

高壓槍是一種以觸發式球閥為核心的簡單機械，在水流的作用下，閥球保持在關閉位置或向前位置，或關閉水通過槍進入噴嘴的通道，當扳機被拉動時，它將活塞推到閥珠上，迫使閥珠離開閥座并打開。在水進入噴嘴的過程中，當釋放觸發器時，閥珠在彈簧的作用下回到閥座上，關閉通道。當參數允許時，高壓槍應使操作人員感到舒適。

High pressure gun is a simple machine with trigger ball valve as the core. Under the action of water flow, the valve ball is kept in the closed position or the forward position, or the channel where water enters the nozzle through the gun is closed. When the trigger is pulled, it pushes the piston onto the valve ball, forcing the valve ball to leave the valve seat and open. In the process of water entering the nozzle, when the trigger is released, the valve ball returns to the valve seat under the action of the spring to close the channel. When the parameters allow, the high-pressure gun shall make the operator feel comfortable.

高壓槍通過高壓軟管總成連接到高壓泵的排放端。高壓水槍是一種常見的執行機構，也是操作頻繁的部件，根據排放壓力的控制閥類型，可以進一步定義高壓水槍：當閥門關閉時，如果高壓水排放到大氣中，則為溢流高壓水槍；當閥門是關閉的，它是一個關閉高壓槍。

The high-pressure gun is connected to the discharge end of the high-pressure pump through the high-pressure hose assembly. High pressure water gun is a common actuator and frequently operated component. According to the type of control valve for discharge pressure, it can be further defined as: when the valve is closed, if the high-pressure water is discharged into the atmosphere, it is an overflow high-pressure water gun; When the valve is closed, it is a closed high-pressure gun.

此外要注意噴淋清洗機啟動高壓槍不出水如果自吸水，高壓泵內有空氣，反復開關高壓槍待高壓泵內空氣排出即可出水，或者接通自來水待高壓槍出水后換成自吸水啟動設備。如果接自來水，有可能是長期放置后高壓泵內高低壓閥粘連，用空氣壓縮機由進水口向設備噴空氣，待高壓槍有氣體噴出接上自來水，啟動設備即可。

In addition, it should be noted that the spray washer starts the high-pressure gun without water. If there is air in the high-pressure pump due to self absorption, the high-pressure gun can be opened and closed repeatedly until the air in the high-pressure pump is discharged, or the tap water can be switched to the self absorption starting equipment after the high-pressure gun is discharged. If the tap water is connected, it may be that the high and low pressure valves in the high-pressure pump are stuck after being placed for a long time, and the air compressor is used to spray air to the equipment from the water inlet. After the high-pressure gun sprays gas, connect the tap water and start the equipment.

噴淋清洗機部件之高壓槍的使用相關內容就講解到這里了，您對此有什么不明白的地方或者說有需求隨時可以來我們網站m.cmicroentropy.com進行聯系！

This is all about the use of the high-pressure gun of the spray washer components. If you have any questions or needs, you can contact us at m.cmicroentropy.com at any time!