噴淋清洗機是處理油污重、積碳厚的零件和工件時的首要選擇。它已更廣泛地用于船舶除銹和船體外部沾附的外部粘附物以及鐵路機車車輛的轉向架和車廂底部，清洗效果非常好。那么噴淋清洗機檢查有哪些關鍵點呢？

Spray cleaning machine is the first choice when dealing with parts and workpieces with heavy oil and thick carbon deposits. It has been more widely used in ship derusting and removing the external adhesion on the outside of the hull, as well as the bogie and car bottom of railway rolling stock, and the cleaning effect is very good. So what are the key points of spray cleaning machine inspection?

噴淋清洗機的噴嘴無污染或堵塞。如果孔口堵塞，就會阻礙水流和水壓，影響清洗機的性能。清洗機的水在清洗循環過程中被循環利用，其中攜帶的污染物可能停留在噴淋臂內。噴淋臂應定期清洗。

The nozzle of the spray washer is free of pollution or blockage. If the orifice is blocked, the water flow and water pressure will be blocked, and the performance of the cleaning machine will be affected. The water of the cleaning machine is recycled during the cleaning cycle, and the pollutants carried therein may stay in the spray arm. The spray arm shall be cleaned regularly.

噴淋清洗機的噴淋臂上的出水孔面向目標表面。部分清洗機的噴臂在使用過程中松動和旋轉，導致噴臂不能面向儀器。許多噴臂兩側都有孔;這些孔可以向上或向下調整。

The water outlet hole on the spray arm of the spray washer faces the target surface. The spray arm of some cleaning machines is loose and rotated during use, resulting in that the spray arm cannot face the instrument. Many spray arms have holes on both sides; These holes can be adjusted up or down.

完整噴槍:部分醫院全部噴槍缺失，但機器仍在使用。如果噴淋臂缺失，清洗機無法正常運轉，因為水壓和水噴淋會大大削弱機械清洗效果。如果噴淋臂沒有了，不要使用墊圈。

Complete spray gun: all spray guns are missing in some hospitals, but the machine is still in use. If the spray arm is missing, the cleaning machine cannot operate normally, because the water pressure and water spray will greatly weaken the mechanical cleaning effect. Do not use washers if the spray arm is missing.

噴淋清洗機的底部的排水屏上無雜物:清洗機底部的排水屏?xí)Ａ魞x表組的污染物。篩網少每天拆下清洗一次，或根據使用次數增加清洗次數。堵塞的篩網會阻礙水流和排水，從而影響清洗機的清洗效果。

There are no sundries on the drainage screen at the bottom of the spray washer: the drainage screen at the bottom of the washer will retain the pollutants of the instrument cluster. The screen shall be removed and cleaned at least once a day, or the cleaning times shall be increased according to the use times. Clogged screens will hinder water flow and drainage, thus affecting the cleaning effect of the cleaning machine.

在實際操作過程中對設備都存在有哪些詳細要求呢？

What are the detailed requirements for the equipment during the actual operation?

1、清洗機會將被清洗物質放入金屬框內，根據清洗物的積垢程度，在一定程度上設定清洗時間，一般3-10分鐘，特別難清洗的物質，使用要求可適當延長清洗時間。（嚴禁把被清洗物質直接放在清洗槽底使用）。

1. The cleaning machine puts the material to be cleaned into the metal frame, and sets the cleaning time to a certain extent, generally 3-10 minutes, according to the scale degree of the cleaning material. For the material that is particularly difficult to be cleaned, the cleaning time can be appropriately extended according to the use requirements. (it is strictly prohibited to put the material to be cleaned directly on the bottom of the cleaning tank for use).

2、清洗機在進行操作時使用的電源是采用三芯插座（相線、零線、地線）。

2. The three core socket (phase line, zero line and ground line) is used as the power supply for the cleaning machine during operation.

3、清洗機的清洗槽內必須要加入清洗液或者是水，其清洗液或者是水的液面不得低于清洗槽高度的三分之二。清洗時，請根據不同的清洗要求，添加洗滌劑，加強清洗效率，所有洗滌劑必須符合不腐蝕清洗機內槽、清洗機的。

3. The cleaning tank of the cleaning machine must be filled with cleaning liquid or water, and the liquid level of the cleaning liquid or water shall not be less than two-thirds of the height of the cleaning tank. When cleaning, please add detergent according to different cleaning requirements to enhance the cleaning efficiency. All detergents must meet the requirements of not corroding the inner tank of the cleaning machine and the cleaning machine.

噴淋清洗機可根據客戶的實際產品、產能、清潔度等要求設計，滿足不同工業領域的清洗要求設備采用鏈傳動網帶運輸。網帶可根據工件要求選用，采用變頻調速;設備具有噴洗、噴淋、烘干、烘干等功能，可根據工件的難易程度進行清洗質量要求：適當增減清洗工位及超聲波漂洗，以獲得比較好的清洗效果對工件的影響。

The spray cleaning machine can be designed according to the customer's actual product, capacity, cleanliness and other requirements to meet the cleaning requirements of different industrial fields. The equipment is transported by chain drive net belt. The mesh belt can be selected according to the requirements of the workpiece, and frequency conversion speed regulation is adopted; The equipment has the functions of spray washing, spraying, drying and drying, and the cleaning quality requirements can be carried out according to the difficulty of the workpiece: appropriately increase or decrease the cleaning station and ultrasonic rinsing to obtain a better cleaning effect on the workpiece.

噴淋清洗機檢查有哪些關鍵點呢？以上便是問題的相關解答了，如果您對此有什么疑問要解答，或者說有購買需求，直接關注我們網站m.cmicroentropy.com進行咨詢吧。

What are the key points of spray cleaning machine inspection? The above is the relevant answer to the question. If you have any questions or purchase needs, please directly follow our website m.cmicroentropy.com for consultation.