碳氫清洗機清洗范圍廣，與傳統的清洗方式有很大的差別，今天小編就來和大家說說傳統清洗模式和碳氫清洗機的不同之處。

The hydrocarbon cleaning machine has a wide range of cleaning, which is very different from the traditional cleaning method. Today, I will tell you the difference between the traditional cleaning mode and the hydrocarbon cleaning machine.

一、工廠不購買碳氫清洗機設備（不知道自動碳氫清洗機的存在，或暫時不考慮購買）。當工件上有油污時，工廠直接在市場上購買清潔劑，并將其全部浸泡在工件上。如果污染物較少，則浸泡一晚，如果污染物嚴重，則浸泡一兩天。他們采用這種浸泡方法去除工件上的油污，雖然在大多數情況下可以溶解油污，但這是非常耗時和費力的。

1、 The factory does not purchase hydrocarbon cleaning machine equipment (the existence of automatic hydrocarbon cleaning machine is unknown, or the purchase is not considered temporarily). When there is oil stain on the workpiece, the factory directly purchases detergent on the market and immerses it on the workpiece. If there are less pollutants, soak for one night, and if the pollutants are serious, soak for one or two days. They use this immersion method to remove the oil stain on the workpiece. Although the oil stain can be dissolved in most cases, it is very time-consuming and laborious.

二、工廠已經購買了設備，但他們經常選擇功能相對單一的清潔設備，即只有清潔和干燥功能，有些甚沒有干燥功能，而自動碳氫清洗機則不同。清潔、干燥、蒸餾和回收集合在一起，整個過程自動化。

2、 The factory has purchased equipment, but they often choose cleaning equipment with relatively simple functions, that is, only cleaning and drying functions, and some even have no drying function, while automatic hydrocarbon cleaning machines are different. Cleaning, drying, distillation and recycling are integrated and the whole process is automated.

不愿意更換設備的人認為只要有超聲波清洗就可以了。這些工廠通常購買幾種小型設備，用水基溶劑或其他鹵代烴溶劑清洗溶劑。此外，該過程是手動的，相當勞動密集型。雖然超聲波清洗比較，但不能保證工件盲孔間隙的清洗，這種恒壓狀態下的清洗效果并不理想。

People who are not willing to replace the equipment think that ultrasonic cleaning is enough. These factories usually buy several small equipment to clean solvent with water-based solvent or other halogenated hydrocarbon solvent. In addition, the process is manual and quite labor-intensive. Although ultrasonic cleaning is relatively advanced, it can not guarantee the cleaning of the blank hole gap of the workpiece, and the cleaning effect under constant pressure is not ideal.

如果對于沒有干燥功能的清潔設備，雖然可以清洗工作部件，但如果制造商只是撿起工作部件自然干燥，就會增加工作部件表面生銹的可能性！雖然這些傳統的清潔方法有優缺點，但如果缺點大于優點，提前購買清潔設備或更換自動氫清潔機更。

If the cleaning equipment without drying function can clean the working parts, but if the manufacturer just picks up the working parts to dry naturally, it will increase the possibility of rust on the surface of the working parts! Although these traditional cleaning methods have advantages and disadvantages, if the disadvantages outweigh the advantages, it is safer to purchase cleaning equipment in advance or replace the automatic hydrogen cleaner.

工件，特別是有盲孔間隙的工件清洗干凈，在外觀上得到客戶的認可，不僅可以提高他們的聲譽，而且可以避免客戶不損失！

Workpieces, especially those with blind hole gaps, are cleaned and accepted by customers in appearance, which can not only improve their reputation, but also avoid customers' loss!

碳氫清洗機設備優于傳統清洗模式的之處就講解完畢了，您對此有這樣的疑惑或者需求，就來我們網站http://m.cmicroentropy.com進行咨詢吧！

The advantages of the hydrocarbon cleaning machine over the traditional cleaning mode are explained. If you have such doubts or needs, please come to our website http://m.cmicroentropy.com Consult!