噴淋清洗機常出現的使用問題就是出水壓力很低或無壓力的情況,此種情況下,要及時檢修設備的故障。那么噴淋清洗機出現壓力過低的問題該如何?
The use of spray cleaning machine is often the problem of water pressure is very low or no pressure, in this case, to timely repair the fault of the equipment. So how to solve the problem of low pressure of spray cleaning machine?
噴淋清洗機通常用于沖洗過濾液壓系統在制造、組裝、使用和維護過程中產生或侵入的污染物;還可用于工作油的定期維護和過濾,以提高清潔度,避免或減少污染造成的故障,從而確保液壓系統設備的高性能、高可靠性和長壽命。
Spray cleaning machine is usually used to flush the pollutants generated or intruded into the filtration hydraulic system during manufacturing, assembly, use and maintenance; It can also be used for regular maintenance and filtration of working oil to improve cleanliness and avoid or reduce failures caused by pollution, thus ensuring high performance, high reliability and long life of hydraulic system equipment.
如果噴淋清洗機在使用后關閉,則沒有沸水、噴槍和管道水和壓力。釋放壓力的方法是開槍,然后從管道中排水。檢查噴嘴是否磨損;如果磨損,請更換噴嘴;過濾器是否堵塞,清洗物品更換過濾器;拆下噴淋清洗機噴嘴,啟動機器,檢查噴槍噴水是否正常。如果水正常,重新安裝噴嘴,檢查機器是否有壓力。如果仍然沒有壓力,則表明調壓閥損壞或噴淋泵密封損壞。
If the spray cleaner is turned off after use, there is no boiling water, spray gun and pipe water and pressure. The pressure is released by firing a gun and draining it from the pipe. First check whether the nozzle is worn; If worn, please replace the nozzle; Whether the filter is blocked, clean the item to replace the filter; Remove the nozzle of spray cleaning machine, start the machine, check whether the spray gun is normal. If the water is normal, reinstall the nozzle and check the machine for pressure. If there is still no pressure, it indicates that the regulating valve is damaged or the spray pump seal is damaged.
Reasons and treatment of insufficient pressure of spray cleaning machine:
噴淋?chē)娏芮逑礄C(jī)噴淋?chē)娮炷p嚴重。噴淋?chē)娮爝^(guò)度磨損會影響設備水壓,應及時更換新噴嘴。接入裝置的流入流量不足,導致水流量和輸出壓力不足。應及時提供足夠的流入流量,以出口壓力較低的問題。如果清水進口過濾器中有空氣,噴淋清潔器應排出清水進口過濾器中的空氣,以確保輸出標準出口壓力。
Spray spray cleaning machine spray nozzle wear serious. Excessive wear of the spray nozzle will affect the water pressure of the equipment, so the new nozzle should be replaced in time. The inflow flow of access device is insufficient, resulting in insufficient water flow and output pressure. Adequate inflow flow should be provided in a timely manner to address the problem of low outlet pressure. If there is air in the clean water inlet filter, the spray cleaner shall discharge the air from the clean water inlet filter to ensure the output standard outlet pressure.
總之,一般從正規渠道購買的噴淋清洗機質量都是很好的,但這也避免不了它在使用過程中會出現一些問題,所以我們需要做好預防工作,更多內容就來這里
m.cmicroentropy.com咨詢吧。
In short, the quality of the spray cleaning machine bought from formal channels is very good, but this can not avoid it in the process of using some problems, so we need to do a good job of prevention, more content to come here m.cmicroentropy.com consultation.